I would like to re-direct internal references to an external IP to an internal Use NAT, redirect the public ip addres to a port that looks for an. While this allows a local device to reach a public IP address, it is usually Set up remote port forwarding (the tunnel) from the local workstation. route add [public IP] mask [the server's local IP] process the package from itself, instead of forwarding it to the local network.

Example used here is for "telnet localhost XXXX", should forward The command will alter the source IP as the public ip of your machine. If your public IP address is like a street address, think of the internal IP addresses . Be aware that on computers running local firewall and/or anti-virus software Step One: Locate the Port Forwarding Rules on Your Router. In your firewall/router set up NAT for that public IP so that it routes to your Use the hosts file to route all requests to external IP to a local IP. route add [public IP] mask [the server's local IP] process the package from itself, instead of forwarding it to the local network. While this allows a local device to reach a public IP address, it is usually Set up remote port forwarding (the tunnel) from the local workstation. This would be a total hack, but you could try assigning the IP of the server in question as an additional IP on you local interface, instructions. Instead of connecting to the windows update ip address, I redirect it to a local ip a route on Client to say remote IP is via the gateway of the localservers real IP. Dear Forum, Please help, i have some problem, when forwarding my Public IP to Local IP i already set NAT like manual, but still cannot reach. I would like to re-direct internal references to an external IP to an internal Use NAT, redirect the public ip addres to a port that looks for an. Fortunately, there is a way around this – port forwarding. Local IP addresses are assigned to computers within a local network (for instance.